Universal Serial Bus Controller Driver Error Code 43

12/23/2021by admin

“My USB stick is not working anymore. When I connect it with my computer I get a message “USB not recognized error code 43”. The stick has all my college work and thesis research files. Is there any way to get back those important data? I am waiting for all suggestions that could help me.”

  1. Universal Serial Bus Controller Driver Error Code 43 Download
  2. Universal Serial Bus Controller Driver Error Code 43 1
  3. Universal Serial Bus Controller Driver Vista
  4. Hp Universal Serial Bus Controller Driver

What is USB error code 43?

In Device Manager expand Universal Serial Bus controllers. Right-click on every USB controller or device and select Uninstall. Restart your computer. Wait until Windows re-install all Universal Serial Bus controllers. Plug your USB device again. Install drivers if needed. The properties window highlights the device's status on the general tab. Check it to find out whether Windows has stopped this device because it has reported problems (code 43) is listed there as the status of the device. And their device status is: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. The driver may be corrupted or missing. USB (Universal Serial Bus) is a technology that has been with us since the 90’s. With the advancement in technology, USB 3.0 now provides faster speeds. Renesas offers USB 3.0 for manufacturers motherboards. The laptop has been installed with clean installation of Windows 10. Therefore, there is no recovery point. When disabling the 'Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft)' the 'Unknown USB Device (Device Descriptor Request Failed' disappears but placing USB, the USB is not found.

When one of the drivers controlling your USB stick/device alerts OS that USB device is failed then error code 43 arises. This might be due to corruption in one of the loaded drivers or unspecified problem with USB.

Universal Serial Bus Controller Driver Error Code 43

How to fix USB error 43?

Technique 1:

  • Remove all attached devices
  • Turn off the PC (Take out battery if you are on laptop)
  • Leave for about 10 minutes
  • Restart your computer
  • Plug your USB stick and check issue is fixed

Technique 2:

Update BIOS and try installing latest Windows service pack for your computer

Technique 3:

Uninstall each device located under Universal Serial Bus controllers in Device Manager. Remove currently installed driver and install it from scratch.

Technique 4:

  • Go to Device Manager
  • Click on Generic USB Hub present under Universal Serial Bus controllers
  • Hit Update Driver Software option
  • Choose “Browse my computer for driver software”
  • Select “Let me pick from list of device drivers on my computer”
  • Under Model, pick Generic USB Hub and click Next
  • Repeat above steps for all Generic USB Hub until the error disappear

Technique 5:

Go to Control Panel >Hardware and Sound >Power Options >Change plan settings >Change advanced power settings > in list, click on USB settings >Disable the setting >Apply >OK

If USB error 43 is not resolved even after above troubleshooting then the drive might be corrupted so it is the time to replace it. If the your USB device is showing in Device Manager then try below step by step guidance to restore files stored on it.

  • Install Yodot Hard Drive Recovery tool on Windows computer
  • Connect USB stick that is showing error code 43
  • Run installed program and click on Partition Recovery
  • Select the disk representing your USB and right click on Tools
  • Opt Save Image File; go next and save this backup file on system drive
  • Detach the USB drive and re-launch the program
  • Right click on Tools and choose Open Image File
  • Browse previously saved backup file and open it
  • Select all disk images located under Drive Images and proceed
  • Hit Skip/Mark All
  • Your USB files will be displayed in File Type View and Data View
  • Mark files that you require and save on safe location

Program to recover files from USB:

The application is built with strong recovery algorithm to retrieve files from a corrupted USB device that is showing error. You can employ the tool on any versions of Windows operating system and get back your USB drive data. It can easily restore all files of any format like documents, presentations, media files, Outlook files, PDF, archive files and more. With the aid of this tool data recovery process can be accomplished on system HDD having SATA, PATA, IDE, ATA etc interfaces. With assistance of this software, data can be retrieved from systems formatted with FAT16, FAT32, NTFS, NTFS5 and ExFAT format. Along with lost and deleted data, even your inaccessible data can be accessed from USB stick, memory card, SSD, external as well internal hard drive and several storage spaces; using the program. Furthermore, handy GUI and supportive technical team assist you in each and every step of file recovery process.

Note:

  • Keep your USB storage spaces virus free
  • Maintain several backups of crucial files on internal as well external storage devices

Useful links

Support

Resources

Follow us on Social Media

Sep. 30, 2018 / Updated by Bessie Shaw to Windows Driver Solutions

“I just upgrade to Windows 10 from Windows 7 and I find that the USB xHCI Compliant Host Controller cannot start (code 10). None of my USB 3.0 ports work. I'm currently using a CM6850 Mobo. Does anyone else have this issue or know a fix?” – Quoted from Windows Community

Are you also troubled by USB xHCI Compliant Host Controller error code 10? Don’t panic. You are not alone. Here are top two effective methods to help you deal with this error. Read on to get them.

Read Also:

Method 1. Run the Troubleshooter to Get Rid of Error Code 10

When the error code 10 occurs, it usually indicates that there are unspecified driver or hardware problems on your computer. To get rid of this error, the first method you can try is to run the troubleshooter. Take these steps:

Step 1. Type “Troubleshoot” into the search bar and click on Troubleshoot in the search result.

Step 2. Scroll down to find Hardware and Devices.

Step 3. Click on Hardware and Devices and select Run the troubleshooter.

Install

The troubleshooter will detect and fix the error automatically. You just need to wait a few minutes.

Method 2. Reinstall or Update the USB xHCI Compliant Host Controller Driver

In most cases, the corrupted or outdated USB xHCI Compliant Host Controller driver should be blamed for the error code 10. If the driver is corrupted or outdated, the device cannot start normally. Therefore, to fix the error code 10, you can try to reinstall or update your USB xHCI Compliant Host Controller driver.

Read Also: 2 Ways to Update Outdated Drivers in Windows 10

To resolve driver issues, it’s highly recommended to use a reliable driver update utility. Reinstalling or updating drivers via a driver update utility will be more efficient and less time consuming than reinstalling or updating drivers manually. Driver Talent can be your best helper in this regard. If you haven’t installed it on your computer, click on the Download Now button below to grab it right now.


Then you can follow the guide below to resolve the error code 10 easily.

If you want to reinstall the USB xHCI Compliant Host Controller driver, you need to uninstall it in the Device Manager first. Do like this:

Step 1. Right click the Start button and select Device Manager to launch it.

Universal Serial Bus Controller Driver Error Code 43 Download

Or you can type “devmgmt.msc” into the Run box and hit Enter to open it.

Step 2. Find Universal Serial Bus controllers in the device list and click it to expand. Then find USB xHCI Compliant Host Controller under it. Right click on USB xHCI Compliant Host Controller and select Uninstall from the pop-up menu.

Universal Serial Bus Controller Driver Error Code 43 1

Step 3. Select OK when asked to confirm the uninstallation.

After uninstall the USB xHCI Compliant Host Controller driver completely, now you can use Driver Talent to reinstall it.

Universal Serial Bus Controller Driver Vista

Step 1. Launch Driver Talent and click the Scan button to perform a full scan on your computer. Then Driver Talent will detect the missing of the USB xHCI Compliant Host Controller driver and will recommend you to download and install it.

Step 2. Click on the Download button in the right of the driver. After the download is completed, click on the Install button to install it.

Step 3. Reboot your computer to let the change take effect.

If you want to update the USB xHCI Compliant Host Controller driver, do as follows.

Step 1. Launch Driver Talent and click the Scan button to perform a full scan on your computer. Then all the iffy drivers will be listed, including the outdated ones.

Step 2. If the USB xHCI Compliant Host Controller driver is detected as outdated, click on the Update button in the right to update it.

Step 3. Reboot your computer.

Those are the top two methods to fix USB xHCI Compliant Host Controller error code 10. If you have any other good ideas, you can share them with us in the comment section below. Any comments will be much appreciated. For more solutions to other computer issues, you can get to the Resource section on this site.

Hp Universal Serial Bus Controller Driver

360 Total Security BusinessDriver Talent for Network Card
Deploy critical protection to secure your corporate dataDownload & Install Network Drivers without Internet Connection
30-day Free TrialFree Download
Please enable JavaScript to view the comments powered by Disqus.
Comments are closed.